Overview
SGP Shield is the optimal protection film set. The soft skin shield will protect the body part, and the optical enhancement hard coated film will protect LCD screen part. SGP Shield is the highest level protection film set.

Features
Body Part -Transparent Soft Skin Shield
SGP Shield is a clear thermoplastic urethane film. It’s an extremely thin film and it has an incredible duration. It has an ability to resist yellowing and offers the highest level of abrasion resistance. It protects body part effectively. It has an aggressive removable adhesive system. This adhesive system is designed to remove without adhesive transfer.

	SGP Shield is an extremely durable film. Its tensile strength is about 1ton/m2(2204.59lb/m2)		SGP Shield offers the highest level of abrasion resistance. It is hard to get scratched.
	SGP Shield has the ability to resist yellowing.		SGP Shield is customized to be fit each model of devices.
	SGP Shield is an extremely thin film. Its thickness is less than 180 micron.		SGP Shield has an aggressive removable adhesive system. This adhesive system is designed to remove safely.

Screen Part - Optical Enhancement Hard Coated LCD Film
The hard coated LCD Protection film is a high quality film that helps to protect LCD screens from damage. It also features advanced optical enhanced film that improve viewing on LCD screens, and has a good surface hardness.

1. Based on PET medium made in Japan, which has more than 95% of light transmission
2. Clean and non- rainbow reflected surface
3. Specially hard coated, which provides high durability protecting scratches (Hardness over 3H)

	Steinheil is a high grade crystal clear film. It is a protective optical enhancement film based on product made in Japan.		Steinheil has a premium hard - coated surface that has no rainbow marks on the coated surface.
	Steinheil has a good surface hardness : 3H ~ 4H and No interference with touch - screen responsiveness.		Steinheil has a premium silicon adhesive - bubble free application.
	Steinheil is an Anti - UV Rays coating film.

Comparison Chart

SGP Shield comes with two part: soft part for body, and hard part for screen. (Products from the others usually come with just soft ones.)
Soft skin of SGP Shield is 30% thinner than similar products from other companies. And since it’s thin, it sticks much better on the curves than the others. Other features, like strength and settlement, are similar. This product is easy to adhere or remove, but must be careful not to get liquid into the device, which could occur errors or disfunction.
Unlikely from other products, we use SGP Steinheil, which is optical enhancement hard coated film, for LCD skin of SGP Shield. Using soft skin, as skin for body part, can cause insensitivity of touch screen and wavy view from LCD.

INSTRUCTIONS

*Instructions for applying soft skin and hard film are different. Use Solution Spray only with soft skin. Please be careful with the solution not to get into the device. Make sure both hands are cleaned before application.
Please Turn Off the Device and Remove Battery While Apply

+Instructions for Soft Skin Film (for Body Part)

Take off the soft skin film from the release film. (Tip : Spray on your tips before to prevent fingerprint on film)

Light spray on the front and adhesive side of the film. (NEVER Spray On Your Device)

Apply the film to the device.

Push out all air bubble using the squeegee included. Please wrap the squeegee with the cloth at this moment. Do not push hard.

Let rounded corners slightly dry, and press it with cloth wrapped finger tips for about 10 seconds to apply for easier adhesion.

Please note that result may vary upon installation

We recommend allowing SGP Shield at least 24 hours for the best result of cleanly fixed without air bubbles. Air bubbles will disappear over 12-24 hours period. ( Time may vary depends on temperature and humidity.)

+Instructions for Steinheil (for LCD part)

*It is important that clean both hands before the procedure
*Film may be useless, if some dust or fingerprint gets on adhesive side of film
*You might see thin white lines on the adhesive side. In this case, it is not scratch or dust and it will disappear after 24 hour of attachment.

	Clean both hands and adjust the location where the film would be on the LCD. Since we make our film little bit smaller than actual LCD size, it is important to arrange the film get to center of LCD before you take off all vinyl out of the hard film.
	Clean the LCD with cleaner and cloth included. If there is a dust left on the LCD, that can be annoying afterward. Apply cleaner on the cloth, Not on LCD.
	Take of 1/3 of back vinyl and begin to apply it on the area you desired of LCD. Take of the rest of back vinyl as you fully attach the film.
	Make the film settle on the LCD using the squeegee included. If there is an air bubble, slightly lift up the area that has bubble and adhere again. Or push the bubble out to the sides with the squeegee.
*In Case of Dust Left Underneath Afterward
	*If you see any dust after all works are done, lift up a corner with a tape and remove dust.